张于北 杨党纲

（中航工业北京航空材料研究院、航空材料检测与评价北京市重点实验室，北京 100095）

　　摘要：运用激光错位散斑技术对航空航天蜂窝制件进行了现场检测。当测试对象由人工缺陷样件换成大型的飞行器部件，检测地点换成储存这些部件的工业大厂房时，原本一流的检测设备可能不再灵敏、好用，甚至难以调节到实验室中平常检测所呈现的正常状态。本文描述了现场检测中的一些干扰因素及解决措施。本文提供的检测结果表明这些措施是有效的，此类现场检测是成功的。

　　关键词：激光错位散斑，无损检测，蜂窝结构，激光干涉仪

InSitu Inspection Of Some Honeycomb Sandwich Compenents By Shearography

Yubei Zhang and Danggang Yang

 AVIC Beijing Institute of Aeronautical Materials,Beijing Key Laboratory of Aeronautical Materials Testing and Evaluation,Beijing 100095,China ）

　　Abstract:Some in-situ Non-Destructive Tests for large honeycomb sandwich components were done and described in this paper. When environmental condition changed, your first-class equipment could be sensitive no longer,even it was difficult to make them work as normal as usual. The effect of surroundings disturbance and the concerned solutions are presented in this paper. The measuring results show that the non-destructive testing on site for these assembly parts is successful.

　　Key words:shearography,NDT,honeycomb sandwich,laser interferometer

　　联系方式

　　张于北：zyb2012@aliyun.com

责任编辑：赵泽南

《中国腐蚀与防护网电子月刊》征订启事
投稿联系：刘娟 电话：010-82387968-807
QQ: 2850329508 邮箱：liujuan@ecorr.org
中国腐蚀与防护网官方 QQ群：140808414